NEWS CENTER

EXHIBITION

Vietnam exhibition June 2019
Vietnam exhibition June 2019

10

2020-06

Vietnam exhibition June 2019

10

2020-06

Thailand exhibition from November 20th to 23rd 2019

09

2020-04

What are the mechanical structures of the sawing machine?

The main components of the sawing machine are bottomed; the bed, the column; the saw beam and the transmission mechanism; the guide device; the workpiece clamping; the tensioning device; the feeding frame; the hydraulic transmission system; the elect...

09

2020-04

Installation and commissioning

1. The hydraulic oil on the sawing machine should be fully added, and the sliding and rotating parts should be coated with a layer of engine oil.2. Install the saw band on the band saw, adjust the tensioning device (turn the left handle of the saw fr...

09

2020-04

The servo position control module of the sawing machine system uses a combination of sampling interpolation and foresight control

Decide to close the position of the feeding cylinder so that the feeding cylinder just reaches the target position when it stops. Due to electromagnetic mechanical hysteresis and motion inertia, it is almost impossible to control the feed carriage to...